Praxair/Tafa Arc Spray Aluminum Wire – 01T

Made exclusively for arc spraying, 01T Aluminum is highly resistant to atmospheric corrosion. The coating acts as a galvanic corrosion inhibitor and also forms an oxide film producing a protective coating, thus, is recommended under a variety of environmental conditions and is used exclusively on submerged water applications. For long-term anti-corrosive applications, aluminum should be covered with a protective 5-8 mil layer of a suitable sealer, in all but mild rural applications. Aluminum 01T meets the following specifications:

MIL-STD-2138A (SH), Metal Sprayed Coatings for Corrosion Protection  

Department of Defense MIL-W-6712C Table II, Aluminum

PWA 1320F

SNECMA DMR33-012

Garrett FP5045

GE CF6 Overhaul Manual operation number 70-49-40 

Praxair/Tafa Arc Spray Zinc – 02Z

Made exclusively for arc spraying, zinc 02Z is primarily designed for use as an EMI/RFI shield, capacitor end spraying and protective anti-corrosion coating for general oxidation resistance. Arc spray 02Z is 99.99% pure, and is not contaminated in the arc spray process. Zinc 02Z wire meets the Department of Defense Specification MIL-W-6712C, Table II, Zinc. Traditional applications of zinc have been primarily for corrosion protection, both in the atmosphere and in the marine environment for long-term anti-corrosive service.

Praxair/Tafa Arc Spray Pure Tin Alloy Wire – 02W

Made exclusively for arc spraying, pure tin is a low melt material with excellent solderability, conductivity and corrosion resistance. Arc spray tin wire meets Department of Defense Specification MIL-W-6712C, Table II, Tin. This wire is commonly used in electrical applications to produce solderable coatings for electrical connections and as a very effective EMI/RFI shield. It is also extremely corrosion resistant to a variety of chemicals and solvents and may be used as a tank liner in some applications.

Lastly, we maintain a wide selection of wire products in stock, eliminating costly delays waiting for products to arrive, some as long as 2 weeks in order for a project to begin. Each project is unique and specifications too numerous to list here, so please contact us to discuss your specific requirements.